Great Midwest Yacht
sail boat
sail boat

LINE & WIRE

Halyards
 

Main halyard, GMW standard 

- exits side of mast and clips to fixed hook on side of mast. Two swaged balls near splice

GE140
$83.50
Main halyard, gold mast 

- exits side of mast and clips to fixed hook on mast above gooseneck. Two swaged balls near splice. Requires drilling of mast

GX140
$81.25
Jib halyard, cleats on trunk  

- clips to sliding hook on side of centerboard trunk. One swaged ball near splice. Can be used on any mast

GE158
$76.25
Jib halyard, cleats on fwd grating  

- secures with a cam cleat located on forward grating cap aft of mast

GX158
$75.25
Spinnaker halyard 

- 5/32" prestretch

GB140
$24.50

Pre-cut line
 

Mainsheet 

- length is for a standard 3:1 system

3/8"

GB420
$45.00

9 mm Mafioli Swiftcord

GB420-1
$94.05
Jibsheet 

endless, 3/8in

GB421
$26.95

endless, 9 mm Mafioli Swiftcord

GB421-1
$60.65

double-ended, 3/8 "

GB422
$28.75
Spinnaker sheets 

endless, 1/4"

GB315
$34.85

endless, 3/16", for light air

GX315
$21.85

endless, 6 mm Mafioli Swiftcord, low stretch

GB315-1
$68.25

endless, 4 mm Mafioli Swiftcord, for light air

GB315-2
$37.75

1/4", double-ended, pair

GB316
$38.00
CB control line 

- 1/4"line, used for CB drum take-up and trunk-mounted cleat

GB350
$15.40
Vang line 

- 1/4" line, connects boom to stanchions and multiple-purchase vang block

XB344
$7.35
Cunningham control line 

- 3/16", for 45° brace-mounted double-ended control

GB371
$4.47
Topping lift 

- 5/32" pre-stretch, hangs from block on mast, your hook at one end, block at the other

GB381
$7.60
Topping lift control 

- 3/16", for 45° brace mounted double-ended control

GB382
$5.67
Traveler control lines 

- 1/4", trunk cap mounted, pair

XB320
$11.35
Vang control line 

- 1/4", for 8:1 block-and-tackle system

XB345
$9.45

Miscellaneous
 

Lifting bridle assembly 

- 3/8" dacron. With 2 stainless S-hooks for attachment to forward grating and D-shackle for aft attachment. Grating hardware is included, aft hardware is not

GF820
$52.25

bridle only

GF821
$45.40
Topping lift hangar assembly 

- 3/32" wire supports Harken block from middle spreader

GF123
$29.20

wire only

GE123
$5.00
Shock cord 

- tensions the topping lift hook when not in use

GB380
$3.10

Stays
 

1/8" 1 x 19 stainless steel wire, with swaged forks at top

Forestay 

- top is swage fork, bottom isturnbuckle. Attaches to fixed tang or pigtail above rail

GE161
$78.50
Pigtails 

- connects forestay lever to above-rail forestay. Supplied with built-in stainless bushed fairlead. Eye at bottom is 1/4" - top: 3/16" swage eye, bottom:1/4" swage eye. Stainless-bushed fairlead mounts to bow plate Eye at top is 3/16"

short, for GMW and Clark hulls

GE400
$32.00

long, for D&M hulls with brass bow plate (rectangular holes)

GE404
$36.35

long, for D&M fg hulls with stainless bow plate

GE405
$44.45
Shrouds 

- price is per pair, all have swage forks at top

GMW standard, bottom iss wage fork. Attaches to chainplate on seat

GE170
$129.00

D&M standard. Longer than GMW. Bottom is swage fork. Attaches to chainplate on seat

GE171
$129.00
Microadjust shroud assembly 

- GMW microadjust shrouds, Staymasters, connecting pins. Allow very fine rake and rig-tension adjustment.

GE176
$227.90

GMW, D&M microadjust shrouds. Use with Staymasters

GE172A
$128.00

StayMaster shroud adjuster, pair

GC014
$93.90

GMW multi-adjust. Use with multi-hole shroud extender. Bottom iseye

GE172
$120.00

D&M multi-adjust. Use with multi-hole shroud extender. Bottom iseye

GE173
$120.00