Great Midwest Yacht
sail boat
sail boat

STAINLESS STEEL FITTINGS

Block attachments & accessories
 

D-shackle 

- 1" long, with screw pin. Use for vang block on boom, lifting bridle

RF622
$6.95
Eyestraps 

- stamped stainless steel

small, 1 1/4" between centers, used to mount small blocks

H073
$2.15

with mounting screws

H073FB
$2.55

with stainless pop rivets

H073FA
$2.65

medium - high profile, 1 1/2" between centers. Fits Harken 150 and 365

H137
$2.90

with 1/4" bolts & elastic nuts, for mounting to 3/4" wood

H137FA
$10.00

with 1/4" bolts & elastic nuts, for mounting to 7/8" wood (knees)

H137FB
$10.00

medium - low profile,1 1/2" between centers. Fits Harken 150 and 365

H201
$2.15
Shackle 

H072
$4.30
Shackle - double hole 

- couples Harken dinghy or hexaratchet block to H144 mainsheet cleat base

H093
$7.80
Sidestrap 

- both mounting holes are on same side of loop. Secures blocks, lines, hiking straps when pull is from one direction

RL319
$4.50
Stanchion bale 

- mounts on stanchion to anchor vang block or vang dead-end. Includes fasteners

RL317BF
$4.75
Stand-up springs 

small - for bullet blocks

H097
$0.90

large - for dinghy blocks

H071
$1.15

Pins
 

Mainsail tack pin 

- 1/2" , fits forward boom casting

GB185
$3.85
Clevis pins 

- headed stainless pins. Secures with ring-ding or cotter pin

1/4" pin - for outhaul sheave, forestay lever

RF266
$4.45
Quick-release pin 

- 3/16", solid hardened-stainless pin with ball detent at one end. Caution - the hollow, center-push quick pins will break under shroud loads

medium lenght, attaches shroud to chain plate on seat

GB005
$4.25

short length, attaches shroud to shroud extender or Staymaster

GB013
$3.95
Ring-ding 

- wire rings for easy attachment to clevis pins

small

GB155
$0.25

medium

GB156
$0.17

Miscellaneous
 

CB trunk nose plate 

- fits at top front of centerboard trunk opening. Eliminates wear from line or wire

GB800
$14.00
Jib tack bolt swivel 

- 1/4" bolt mounts through GMW bow plate

GC403
$15.00
S-hook 

- stainless. For topping lift, lifting bridle

RF48A
$6.95
Spinnaker guy hook 

- J-hook bolted through rail

RF91
$23.95

for spinnaker guy hook, pair

GB310
$3.75

Standing rigging accessories
 

Bow cover plate 

- stainless steel plate 1 5/8 x 3 1/4"wide. 3/4" hole accepts fairlead of pigtail

GB400
$18.00
Chain plate 

- secures shroud to seat horn, ea

RL352S
$7.85

chain plate and backer, pair

GX018
$27.60
Hyfield lever and keeper 

- get high rig tension easily. Includes keeper to lock lever in place, all fasteners

GC402
$41.60

Hyfield lever only

GB401
$33.00
Shroud plate asembly 

- includes pair of wrap-around shroud plates, plastic bushings, fasteners, and installation instructions

GB015
$27.50
Turnbuckle parts 

- loose parts that somehow fall off while driving down the road

turnbuckle barrel

RL34C
$9.25

turnbuckle bottom stud and swivel fork

GB161
$12.75